Close Cart

Your cart is currently empty.

Browse:

iFi AUDIO Nano iDSD Black Label iFi AUDIO Nano iDSD Black Label
  • iFi AUDIO Nano iDSD Black Label
  • iFi AUDIO Nano iDSD Black Label
  • iFi AUDIO Nano iDSD Black Label
  • iFi AUDIO Nano iDSD Black Label
  • iFi AUDIO Nano iDSD Black Label
  • iFi AUDIO Nano iDSD Black Label

iFi AUDIO Nano iDSD Black Label

iFi AUDIO Nano iDSD Black Label

$199.00
  • Pocket-sized, portable DAC and amplifier for use on the go with mobile audio devices
  • Play or stream Spotify, iTunes, and Youtube content from your smartphone or tablet—compatible with iOS and Android
  • Connect to your gaming console or computer to improve the quality of your sound
  • 2 x 285mW, dual mono amplifier can drive most headphones including in-ear monitors (IEM)
  • Amplifier delivers more than double the power of the original Nano iDSD into 16 Ohms and over four times the power into high-impedance headphones
  • Built-in IEMatch circuit deliver a hiss-free response from sensitive headphones and IEMs
  • S-Balanced technology supports headphones and IEMs fitted with balanced wiring
  • S-Balanced provides unbalanced headphones with the same balanced benefits including low noise, low distortion, and half the crosstalk
  • Maximum output power of (32R)
  • Burr-Brown DAC can handle PCM files up to 32-bit / 384 kHz, as well as DXD and DSD format—DSD offers up to 256 times the sample rate of a CD
  • Supports MQA high-resolution streaming format
  • Lithium-ion polymer battery provides up to 10 hours of continuous operation

Headphones.com is stoked to be accepting NANO, Bitcoin, Ethereum, Litecoin and many more cryptocurrencies!

  • Description

    The miniature iFi AUDIO Nano iDSD Black Label is a portable, USB DAC and headphone amplifier designed to provide high-resolution audio on the go, when playing or streaming music on your iOS/Android smartphone or tablet. The iFi AUDIO Nano iDSD Black Label may be a mouthful to say, but it is currently one of the best portable DAC + headphone amplifiers on the market. Say goodbye to your Chord Mojo and hello to your Nano iDSD Black Label!

    The Nano iDSD Black Label is equipped with high-quality components and a Burr-Brown DAC chip that can handle PCM files up to 32-bit / 384 kHz. It offers support for Tidal's MQA high-resolution streaming format as well as DXD and DSD file formats. You can choose between two listening options—the Listen filter (Minimum Phase Bezier Filter) and the Measure filter (Linear Phase Transient Aligned Filter) for a neutral frequency response.

    The amplifier provides 285mW of power per channel, giving it the ability to drive high-impedance headphones. The built-in IEMatch circuit delivers a hiss-free response from sensitive headphones and in-ear monitors. S-Balanced wiring technology supports headphones and in-ear monitors fitted with balanced wiring, while providing unbalanced headphones with the benefits of a balanced circuitry, including low noise, low distortion, and half the crosstalk.

    The Nano iDSD Black Label is equipped with a rechargeable lithium-ion polymer battery, which provides up to 10 hours of continuous operation. It ships with a USB cable, two USB adapters, a silicone bracelet, and an iFi bag.

    *Headphones.com is very pleased to announce that you have even more options to pay for your iFi Audio Nano iDSD Black Label DAC + headphone amplifier! Now when you hit the Pay with Cryptocurrencies button, you have the option to pay with cryptocurrencies such as NANO, Bitcoin, Litecoin, Ethereum and more! We are very excited to able to give you these options now and for the future!*

    • Pocket-sized, portable DAC and amplifier for use on the go with mobile audio devices
    • Play or stream Spotify, iTunes, and Youtube content from your smartphone or tablet—compatible with iOS and Android
    • Connect to your gaming console or computer to improve the quality of your sound
    • 2 x 285mW, dual mono amplifier can drive most headphones including in-ear monitors (IEM)
    • Amplifier delivers more than double the power of the original Nano iDSD into 16 Ohms and over four times the power into high-impedance headphones
    • Built-in IEMatch circuit deliver a hiss-free response from sensitive headphones and IEMs
    • S-Balanced technology supports headphones and IEMs fitted with balanced wiring
    • S-Balanced provides unbalanced headphones with the same balanced benefits including low noise, low distortion, and half the crosstalk
    • Maximum output power of (32R)
    • Burr-Brown DAC can handle PCM files up to 32-bit / 384 kHz, as well as DXD and DSD format—DSD offers up to 256 times the sample rate of a CD
    • Supports MQA high-resolution streaming format
    • Lithium-ion polymer battery provides up to 10 hours of continuous operation
  • Tech Specs

    DAC

    DAC
    DSD, DXD, PCM DAC by Burr Brown
    BitPerfect DSD processing
    BitPerfect DXD processing
    Clock
    Low-jitter
    Crystal clock
    Audio Formats
    DSD
    256, 128, 64, 12.4, 11.2, 6.2, 5.6, 3.1, 2.8 MHz
    DXD
    384, 352.8 kHz
    PCM
    384, 352.8, 192, 176.4, 96, 88.2, 48, 44.1 kHz
    MQA
    88.2, 96, 176.4, 192 kHz
    Filters
    PCM
    Listen
    Transient-optimized minimum phase
    Measure
    Optimized frequency response
    DSD
    Listen
    Extended bandwidth
    Transient-optimized
    Measure
    Narrow bandwidth
    Low-output band
    Noise-optimized
    DXD
    Fixed BitPerfect processing
    MQA
    Fixed MQA filter

    Headphone Amplifier

    Amplifier
    Dual mono
    2 x 285 mW
    Direct Drive, circuit without coupling capacitor
    Dynamic Range
    Direct
    >109 dBA at 3 V
    iEMatch
    >107 dBA at 0.5 V
    THD & Noise
    <0.005%
    Output Level
    >3.5 V at 600 Ohms load (direct, 20 mW / 600 Ohms)
    >2.9 V at 30 Ohms load (direct, 285 mW / 30 Ohms)
    >1.7 V at 15 Ohms load (direct, 200 mW / 15 Ohms)
    Output Impedance
    Direct
    <1 Ohms
    iEMatch
    <4 Ohms
    Channel Separation
    >79 dB at 600 Ohms load (Direct)
    >79 dB at 15 Ohms load (Direct) 1 kHz TRRS balanced wiring

    Line Output

    Dynamic Range
    >109 dBA
    THD & Noise
    <0.004%
    Output Voltage
    2.15 V (±0.05 V)
    Output Impedance
    <240 Ohms
    Channel Separation
    >99 dB at 1 kHz
    Jitter
    Below test set limit, correlated

    General

    Input Connectors
    Rear
    USB 2.0 Type-A OTG port (with built-in iPurifier technology)
    Output Connectors
    Rear
    1 x 1/8"
    3.5 mm line out (L+R)
    Front
    2 x 1/8" &
    3.5 mm headphone outputs, compatible with balanced wiring (one direct and one with integrated iFi iEMatch)
    Controls
    1 x volume knob
    1 x digital filter switch with Measure/Listen positions
    Battery Type
    Lithium-ion polymer
    Built-in
    Rechargeable
    Battery Life
    10 hours
    Dimensions
    (L x W x H) 3.8 x 2.5 x 1.0" / 96.0 x 64.0 x 25.5 mm
    Weight
    4.9 oz / 139.0 g
  • In The Box

    • iFi AUDIO Nano iDSD Black Label Portable USB DAC and Headphone Amplifier
    • iFi Bag
    • Silicone Bracelet
    • USB Type-A Female to USB Type-B Female Adapter
    • USB 3.0 Type-A Male to USB Type-A Female
    • USB Type-A Female to USB Type-B Female Cable
    • Limited 1-Year Warranty
  • Reviews

    Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

The miniature iFi AUDIO Nano iDSD Black Label is a portable, USB DAC and headphone amplifier designed to provide high-resolution audio on the go, when playing or streaming music on your iOS/Android smartphone or tablet. The iFi AUDIO Nano iDSD Black Label may be a mouthful to say, but it is currently one of the best portable DAC + headphone amplifiers on the market. Say goodbye to your Chord Mojo and hello to your Nano iDSD Black Label!

The Nano iDSD Black Label is equipped with high-quality components and a Burr-Brown DAC chip that can handle PCM files up to 32-bit / 384 kHz. It offers support for Tidal's MQA high-resolution streaming format as well as DXD and DSD file formats. You can choose between two listening options—the Listen filter (Minimum Phase Bezier Filter) and the Measure filter (Linear Phase Transient Aligned Filter) for a neutral frequency response.

The amplifier provides 285mW of power per channel, giving it the ability to drive high-impedance headphones. The built-in IEMatch circuit delivers a hiss-free response from sensitive headphones and in-ear monitors. S-Balanced wiring technology supports headphones and in-ear monitors fitted with balanced wiring, while providing unbalanced headphones with the benefits of a balanced circuitry, including low noise, low distortion, and half the crosstalk.

The Nano iDSD Black Label is equipped with a rechargeable lithium-ion polymer battery, which provides up to 10 hours of continuous operation. It ships with a USB cable, two USB adapters, a silicone bracelet, and an iFi bag.

*Headphones.com is very pleased to announce that you have even more options to pay for your iFi Audio Nano iDSD Black Label DAC + headphone amplifier! Now when you hit the Pay with Cryptocurrencies button, you have the option to pay with cryptocurrencies such as NANO, Bitcoin, Litecoin, Ethereum and more! We are very excited to able to give you these options now and for the future!*

  • Pocket-sized, portable DAC and amplifier for use on the go with mobile audio devices
  • Play or stream Spotify, iTunes, and Youtube content from your smartphone or tablet—compatible with iOS and Android
  • Connect to your gaming console or computer to improve the quality of your sound
  • 2 x 285mW, dual mono amplifier can drive most headphones including in-ear monitors (IEM)
  • Amplifier delivers more than double the power of the original Nano iDSD into 16 Ohms and over four times the power into high-impedance headphones
  • Built-in IEMatch circuit deliver a hiss-free response from sensitive headphones and IEMs
  • S-Balanced technology supports headphones and IEMs fitted with balanced wiring
  • S-Balanced provides unbalanced headphones with the same balanced benefits including low noise, low distortion, and half the crosstalk
  • Maximum output power of (32R)
  • Burr-Brown DAC can handle PCM files up to 32-bit / 384 kHz, as well as DXD and DSD format—DSD offers up to 256 times the sample rate of a CD
  • Supports MQA high-resolution streaming format
  • Lithium-ion polymer battery provides up to 10 hours of continuous operation

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)