Close Cart

Your cart is currently empty.

Browse:

SPL Performer s800 Stereo Power Amp SPL Performer s800 Stereo Power Amp
  • SPL Performer s800 Stereo Power Amp
  • SPL Performer s800 Stereo Power Amp
  • SPL Performer s800 Stereo Power Amp
  • SPL Performer s800 Stereo Power Amp
  • SPL Performer s800 Stereo Power Amp
  • SPL Performer s800 Stereo Power Amp
  • SPL Performer s800 Stereo Power Amp
  • SPL Performer s800 Stereo Power Amp
  • SPL Performer s800 Stereo Power Amp

SPL Performer s800 Stereo Power Amp

SPL Performer s800 Stereo Power Amp

$3,499.00
  • Bi polar transistor power amplifier with VOLTAiR 120V technology
  • 2 x 285 W into 4 ohms; 2 x 185 W into 8 ohms (stereo operation)
  • 450 W into 8 ohms (mono operation – Bridge Mode)
  • Toroidal transformer with 855 VA
  • 40800 µF capacitance for faithful reproduction of impulse peaks
  • Gold-plated loudspeaker binding posts with protection covers
  • Neutrik XLR connectors for balanced in- and outputs
  • Direct slave through of the input (e.g. for bi-wiring)
  • Input trim switch for attenuation up to -5.5 dB in 0.5 dB steps
  • AMP CTL connector for remote power on/off switching (e.g. with Director or Phonitor x)
  • Overheat protection with Temp LED
  • DC (direct current) voltage protection with Protect LED
  • Front and Lid made from aluminum, housing made from sheet metal
  • Made in Germany
loading

Headphones.com is proud to be an early adopter accepting payments online via cryptocurrency.

A portion of all sales from Headphones.com will be donated to help children with hearing loss.

Learn More
  • Description

    Performer s800 is a stereo power amplifier that delivers 2 x 285 W to 4 ohms loudspeakers. In bridge mode it delivers 450 W into 4 or 8 ohms.

    The technical basis of all Professional Fidelity units is SPL’s proprietary 120 V Rail Technology, which we also call VOLTAiR technology. The name makes reference to the unequaled high voltage of 120 V (+/-60 V DC) and the huge dynamic range of over 140 dB that goes with it.

    • Bi polar transistor power amplifier with VOLTAiR 120V technology
    • 2 x 285 W into 4 ohms; 2 x 185 W into 8 ohms (stereo operation)
    • 450 W into 8 ohms (mono operation – Bridge Mode)
    • Toroidal transformer with 855 VA
    • 40800 µF capacitance for faithful reproduction of impulse peaks
    • Gold-plated loudspeaker binding posts with protection covers
    • Neutrik XLR connectors for balanced in- and outputs
    • Direct slave through of the input (e.g. for bi-wiring)
    • Input trim switch for attenuation up to -5.5 dB in 0.5 dB steps
    • AMP CTL connector for remote power on/off switching (e.g. with Director or Phonitor x)
    • Overheat protection with Temp LED
    • DC (direct current) voltage protection with Protect LED
    • Front and Lid made from aluminum, housing made from sheet metal
    • Made in Germany
  • Tech Specs

    General

    Output impedance
    defined by connected device
    Crosstalk
    -110 dB (@1 kHz)
    Loudspekaer Outputs
    2 pairs binding posts with ø4mm cable hole (screwable) and banana plug; fully encapsulated
    Output Power
    2x 285 W RMS into 4 ohms
    2x 185 W RMS into 8 ohms
    1x 450 W RMS into 8 ohms in bridge mode
    Output Voltage
    Stereo
    74 V Peak-to-Peak
    35 V RMS
    Bridge
    180 V Peak-to-Peak
    86 V RMS
    Output Impedance
    Stereo
    0.031
    20 Hz to 20 kHz
    Bridge
    < 0.043
    20 Hz to 20 kHz
    Damping Factor
    Stereo
    300
    20 Hz to 20 kHz
    at 8 ohms
    Bridge
    > 190
    20 Hz to 20 kHz
    at 8 ohms
    Frequency Response
    9 Hz to 100 kHz +0(–0.03 dB)
    < 9 Hz to 200 kHz +0( –3 dB)
    Signal-To-Noise Ratio
    > 118 dB (wide-band, unweighted, referred to full power output)
    > 123 dB (A-weighted)
    Gain
    Stereo
    26 dB
    Bridge
    32 dB
    Total Harmonic Distortion (THD)
    < 0.03 % at 1 kHz (@ 185 W, 8 ohms)
    < 0.19 % at 20 kHz (@ 185 W, 8 ohms)
    < 0.011 % at 1 kHz (@ 450 W, 8 ohms)
    < 0.12 % at 20 kHz (@ 450 W, 8 ohms)

    Line Inputs & Line Outputs

    Neutrik XLR, balanced, Pin 2 = (+)
    Input impedance
    10 k ohms
    Input trimming
    0 dB to -5.5 dB in 0.5 dB steps
    Input sensitivity
    +6 dBu

    Power Supply

    Mains voltage (switchable)
    230 V AC / 50 Hz
    115 V AC / 60 Hz
    Fuses
    230 V
    T 4 A
    115 V
    T 8 A
    Power consumption
    max 900 VA
    Idle power consumption
    40 W
  • Reviews

    Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

Performer s800 is a stereo power amplifier that delivers 2 x 285 W to 4 ohms loudspeakers. In bridge mode it delivers 450 W into 4 or 8 ohms.

The technical basis of all Professional Fidelity units is SPL’s proprietary 120 V Rail Technology, which we also call VOLTAiR technology. The name makes reference to the unequaled high voltage of 120 V (+/-60 V DC) and the huge dynamic range of over 140 dB that goes with it.

  • Bi polar transistor power amplifier with VOLTAiR 120V technology
  • 2 x 285 W into 4 ohms; 2 x 185 W into 8 ohms (stereo operation)
  • 450 W into 8 ohms (mono operation – Bridge Mode)
  • Toroidal transformer with 855 VA
  • 40800 µF capacitance for faithful reproduction of impulse peaks
  • Gold-plated loudspeaker binding posts with protection covers
  • Neutrik XLR connectors for balanced in- and outputs
  • Direct slave through of the input (e.g. for bi-wiring)
  • Input trim switch for attenuation up to -5.5 dB in 0.5 dB steps
  • AMP CTL connector for remote power on/off switching (e.g. with Director or Phonitor x)
  • Overheat protection with Temp LED
  • DC (direct current) voltage protection with Protect LED
  • Front and Lid made from aluminum, housing made from sheet metal
  • Made in Germany

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)